How to Clean the Printing Toolhead Nozzle

The printing toolhead might be clogged after a great amount of usage. This is the tutorial to help you clean the printing toolhead nozzle by yourself.

Instructions:
1. Open FLUX Studio, and choose “Machines” > “Commands” > “Set Toolhead Temperature” to 220°C   .
2. When the temperature reaches 220°C, poke the nozzle from the bottom 3-5 times to the very end that the whole needle is inside. (be careful with the heat!)
3. The head should be unclogged!
 
 
 
There’s the other way to clean up your printing toolhead. Please choose English subtitles:
Please make sure the result should like the middle one to clean the nozzle successfully.

Have more questions? Submit a request