Chapter 3: Engraving with Laser

Before we start 

Before we start engraving, let’s get to know its definitions.


Choose the material of the workpiece. We already set the best parameters for some common materials and you can see their differences in the advanced dialog. More knowledge about materials please go to: Can I engrave on this or that?


Turn on / off for the shading effect. The following fig shows the difference between shading on/off.

Related article : Engraving Mode : Vector and Bitmap


It is the thickness of your workpiece.


You can set advanced parameters for the laser task. Definitions for advanced parameters please go to: What do the adjustable parameters affect?



WARNING! Laser toolhead produces high power laser beams, DO NOT stare the light during engraving process without safety glasses and DO NOT leave the machine unattended. Children are advised to be accompanied by adults.


Operation Steps

STEP 1 :

Push the button on the drawing tool-head and insert the laser module. Make sure the POGO pins are aligned.

Note: Engraving tool-head contains laser module and drawing module and are installed together before shipping

STEP 2 :

Install the engraving tool-head on FLUX Delta

STEP 3 :

Align and set the workpiece to be engraved on the metal base plate firmly

STEP 4 :

Switch to laser function in FLUX Studio and import your desired file

STEP 5 :

Adjust parameters accordingly and make sure you understand the definitions of each parameter before proceeding. 

STEP 6 :

Press start and have fun


** More Engraving Tips

Have more questions? Submit a request