Beambox - Motor Cable Installation

Please follow the steps to install the motor cable. 

 

1. There are both a male and female end on the motor cable. We name it A1 and B1.

IMG_1833.JPG

 

2. Remove the screw and open the right cover. 

rightcover.png

 

3. Insert A1 to A2, the receptacle on the main board. 

IMG_1040.JPG

________.jpg

 

4. Let the cable go backward ant thread it through the small hole on the left side.

IMG_1814.JPG

 

5. Remove 4 screws of the vent cover.

___1.png

 

6. Find the small PCB and unplug the cable in the circle. 

IMG_2609.JPG

_________.jpg

 

7. The cable you just unplugged is B2. Please connect B2 to B1.

IMG_6001.JPG

Have more questions? Submit a request