7.2 Keep Everything Lubricated

Clean and lubricate the guiding rods and rail periodically can extend the lifetime of the moving
parts. The frequency recommended is once every 1 – 2 weeks.


1. Wipe away the oil grease on the guiding rods and rail using a paper towel.

2. Apply lubricant on the guiding rods of the Y axis.

3. Apply lubricant on the top and the side of the linear rail of the X axis.

4 Move the laser head up-and-down, left-and-right several times to evenly distribute the lubricant.
mceclip0.png

Have more questions? Submit a request